I can arrange printing topsheets by thermosublimation. This will take approx. 2-3 weeks.
For information about creating a print file, here.
Because white areas cannot be printed they should be transparent instead and the resin stained white (works only with glass fiber). Or you cover the print on the underside (adhesive side) with the Screen printing ink brilliant white (available in the shop). From 10 Topsheets I can already order white covered.
The print is possible on Topsheet glossy, matt or gripp up to a width of approx. 320 – 340 mm. Maximum length is 1950 mm. All Topsheets are provided with protective film and 0.5 mm thick and are the same as in the shop.
The price is € 95, – incl. Topsheet for a pair of skis.
If I have several Topsheets to print at the same time it will be cheaper (They can all be different.).
From 2 pieces 75, – € / piece.
From 3 pieces 70, – € / piece.
From 5 pieces 60, – € / piece.
For questions or orders please send an email to: firstname.lastname@example.org
New Shipping conditions since 1.2.2019
The shipping costs have increased slightly.
Normally I ship everything with GLS.
Shipping costs can be seen here: here
Synthetic resin and lacquers can be shipped up to 5 kg in one package. Most countries.
Orders from Switzerland and Liechtenstein can also be made directly via the shop. The shipping costs for Switzerland are incl. customs duty. I ship the goods VAT-free. In Switzerland you get a bill from the post office about: possibly customs duties and the Swiss VAT.
Am Weiher 13
The black base is 32 cm in width and only ment to be used for snowboards. Therefore we now have a black base 16 cm in width for skis.
Transparent or coloured base for skis should be split lengthwise first before being cut to final shape.
Attention! The base is very sensitive to temperature changes as long as it is not glued.
The rough and grinded side of the black base should be glued.
For transparent, cloured, and also the 32 cm black base both sides are similar and prepared to be glued.
Two-layer, a soft layer for better bonding and a hard layer as a better scratch protection. The glossy topsheet has a protective film which is also sanded. To detect the adhesive side, simply loosen the protective foil at a corner. The roughened glue side is already flamed and should not be soiled.
Only when absolutely necessary clean carefully with acetone and allow to dry very well.
Both topsheets are suitable for thermal sublimation and screen printing.
On wood veneer as a design layer you can better take Ski lacquer as protection, since the topsheet on wood does not stick so well.
We glue the cores with a D3 white glue, which is only conditionally water resistant.
This is not a problem as the core should be protected against water, otherwise the wood swells.
We have so far only had good experiences.
However, if you want to glue your cores with epoxy, I can also send the strips separately.
The ABS sidewalls are glued with the ground and flamed side with a PUR wood glue.
For a pair of skis you need:
– 2 m Base (32cm width) or 4 m Base (16cm width)
– 4 pieces Edges 2m straight or 2 pieces Edges 4m curved
– 8 m VDS tape
– 4 m glass fiber or carbon fiber
– 2 pieces of Woodcores
– 1 piece Tipspacer
– 1 piece of ABS sidewalls
– 1 kg of Resin (we need for a pair of skis about 700 – 800 g)
– 2 m Topsheet
– 1 bottle of Airout
– Carbon strip
– Foldback brackets
– Template wood
The site from and for Skibuilders. Lots of information and a forum.
There is printed fleece, for your own design, for inserting.
Small, interesting Skicompany.
Mountain bike rides, driving technique training in the Allgäu, private tours and lots of fun !!
The new snow sports school in the Tannheimertal!
There are skibuilding workshops
Skibuilding workshops in Graz.
Skibuilding workshops in Nufringen
Small but fine Skicompany in Mittenwald, which builds skis according to your wishes.
Ski- and Snowboardbuilding workshops in Hamburg
Ski- and Snowboardbuilding workshops in Laax in Switzerland
Ski- and Snowboardbuilding workshops in Buch in Vorarlberg Austria